Best Configs for CS GO

Each player must have their own game settings, but it’s a very long time to create your own settings, will you agree? Sometimes it is better to use ready-made solutions. In this article we will talk about the best settings: working sensation, sight, mouse settings, keyboards, ping settings as well as other hardware. With us you can find a config for yourself! Nowadays, anyone can download the PRO configs of the players of the CS GO. To shoot like a PRO player in CS GO, you will need to download configs of professional players. Each config is individual. In addition to all the configs of popular players, you can download the config for shooting, cfg to improve your goal, mouse and config card. There is a lot of choice here, you just have to pick up your config and play like a real pro-gamer. If you watch the game and watched a lot of streams from top tournaments, then you probably got accustomed to a certain player with whom you would like to be equal in skill level. The best configs to which you can navigate are the configs of the top 3 best players of cs go. s1mple (Natus Vincere) Dev1ce (Astralis). NiKo (Faze Clan).

CS GO Configs Mouse

Mouse settings are a basic thing that affects the quality and success of your game. Any professional or very good player in CS GO sets the basic mouse settings without acceleration.

CS GO Mouse Settings

The most important thing here is to turn off the acceleration of the mouse. The parameter "Direct connection" must be enabled. This means that the game will ignore the mouse settings in windows. What is this for? This is just a recommendation. If you wonna to make another the settings in windows and by mistake forget to bring them back, you will still be able to play normally. You may change settings in the console: m_rawinput "1" // Direct Connection Enabled m_customaccel "0" // Mouse Acceleration Disabled m_customaccel_exponent "0" // Acceleration value 0 m_mousespeed "0" // mouse acceleration "0" m_mouseaccel1 "0" // mouse acceleration (at 2x mouse speed) m_mouseaccel2 "0" // mouse acceleration (at 4x mouse speed)

DPI / Mouse Sensitivity

What is DPI? DPI - the number of points per 1 inch (2.54 cm). For example, you have a 1000 DPI monitor (that is, 1000 dots per 1 inch), and a mouse speed of 800 DPI means that if you move the mouse 1 inch, it will pass 1 inch on the monitor, but skip a few points on the monitor . Pro players use a low sensitivity setting, but this is very individual. If you are used to high speed of the mouse, then you will need time to get used to it, but believe it will improve your game. You will have to move the mouse more, but you will get used with time. Returning to the conversation about pro-players, look at the graph built on a recent survey. In the first graph, the X-axis is the rank of the players, the Y-axis is the number, the size indicates the DPI. From the graph it is clear that most high ranked players use 400-800 dpi.

Mouse Settings table

CS GO All Gun Configs

The size and position of your weapon on the screen can affect your field of view. It is very important to see more objects and enemies. If you want the dev's to be more visible and to take up less space on the screen, open the console and enter the following commands: put your weapon in the optimum position for your gameplay.

CS GO Crosshair Configs

Crosshair is a sight view setting. The default sight does not look bad, but not a single professional uses it. Each player adjusts the scope for themselves and their screen. There is only one thing that most people have - this is a static sight. To fully customize the sight through the console and commands like "Crosshair" you have to use about 13 teams. Nobody needs to know them all, as the sight is usually adjusted 1 time and for a long time, but it takes a lot of time. In order to simplify this task, we have done - the cs go sight generator. In it, you can quickly, visually and easily adjust your scope, and then copy the commands and paste them into the console.

CS GO Bot Config

Many people know how to create a game with bots, but do not know how, for example, to play 1 × 5 against bots. After all, the default settings of bots carry a lot of inconvenience, for example, you can run through a couple of minutes without finding a single bot of the enemy team, because the bots from your team kill them.

So, what teams need to know?

The most basic:

sv_cheats 1 - includes cheats, in other words, allows us to use commands like infinite cartridges, turn on bullet trails, etc. It is also used in the training of grenades. mp_autoteambalance 0; mp_limitteams 0 - remove auto-balancing of commands and limit bots. bot_kick - hit all bots.

Knowing 5 simple teams you can already play one against five or more bots. To do this, you need to register all the commands we set out above in the following order: sv_cheats 1; bot_kick; mp_autoteambalance 0; mp_limitteams 0; bot_add_t or bot_add_ct (depending on which team you are in).

The last command needs to be written several times, as it adds 1 bot at a time. You can also write all these commands to the config, so as not to prescribe them every time, and just run the config, about the config in more detail a little further.

bot_dont_shoot 1 - bots stop shooting
bot_knives_only - bots will run with knives
bot_all_weapons - returns all weapons to bots
bot_quota 11 - number of bots (not to write add_bot much)
bot_join_team T - which team the bots will enter
mp_death_drop_gun 0 - the weapon will not fall out after death
mp_death_drop_defuser 0 - a defuse will not fall out after death
sv_infinite_ammo 1 - endless ammo
bot_join_after_player 1 - bots join after the player

Infinite ammo will be appropriate if you set non-shooting passive bots and train the target with single shots.

CS GO Graphic Config

Here, the opinions of many people differ, who say that 4: 3 is better, others say that 16: 9 is more visible, but everyone adjusts as it suits him. Set the brightness to the maximum, turn on multi-core processing and full screen, no synchronization is needed.

Table with CS GO Graphic Configs

CS GO Map Configs

There is such a map on which you can customize CS: GO for yourself how you want - this is the Config Generator. Here you can change the sight, the location of the hand, adjust the HUD, radar, sound and video. You can customize the keys and their actions. You can put a ready-made config for both players and popular CS: GO streamers. For this, you need to download Config Generator.

CS GO Radar Config

The first thing that is better to do is to create a game with bots so that they cannot kill you and already in the game are engaged in setting up the radar. To enable the radar, you need to register the drawradar command in the console; To hide the radar, use the console command hideradar; cl_hud_radar_scale This command is responsible for the size of the radar on your screen.

Left: cl_hud_radar_scale "0.8"

cl_hud_radar_scale "1.3" Minimum: "0.8" // Maximum: "1.3"

cl_radar_always_centered The player is always in the center of the radar. At first glance it may seem that there is not much difference, but the plus is obvious - when you are in the corner of the map - you will have a greater overview of the area on the radar than if you were in the center of the radar.

CS GO Radar

Left: cl_radar_always_centered "0"

On right: cl_radar_always_centered "1"

Two variables are available for selection, either 0 or 1 cl_radar_icon_scale_min This command changes the size of various icons on your radar.

CS GO Radar

Left: cl_radar_icon_scale_min "0.4"

On right: cl_radar_icon_scale_min "1.0"

Minimum: "0.4" // Maximum: "1.0" cl_radar_rotate Turning on and off the rotation of the radar. If disabled, the map on the radar will always be in the same position.

CS GO Radar